Toyota 4Runner Deck Light Lens
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement lens the Toyota 4Runner deck light. Should be customizable to adapt to fit any rounded,…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
This is a replacement lens the Toyota 4Runner deck light. Should be customizable to adapt to fit any rounded, rectangular lens held in place with 2 screws.
Perfect accompaniment to the Deck Light Housing:
https://www.thingiverse.com/thing:6654621 Print Settings
Printer Brand:
Type A Machines
Printer:
Type A Machines 2015 Series 1
No
Supports:
Yes
0.6mm nozzle, 0.3mm layer height
Filament: Amolen PETG Clear
Notes:
Supports needed if using recessed screw holes. Also, if the bevel parameter is set much over 1.1, the slope of the overhanging ends may need support material.
You can sand off the corners to make a more rounded surface. Use a colored, clear filament if you want to change the lamp color.
How I Designed This
Customizable OpenSCAD file
Simply measure the length and width of the desired rectangular lens along with any corner radius and the thickness along with the width of the flat portion on the ends and the long edges. Measure the hole - hole spacing and diameter for the screw holes. Model is built centered at (0,0), so assumes symmetrical hole placement.
Category: Automotive