Dr. Tung's Floss Container - no supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Dr. Tung's floss container with slot for floss cutter. Replaces disposable floss containers.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 2
- Views
- 180
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
Love Dr. Tung's woven floss - It's the best! The new biodegradable cardboard containers are admirable but too flimsy for me.
I generated a container with Walter's customizable bayonet over at thingiverse, then added a spindle and a place to attach the metal floss cutter from the cardboard floss container.
*Edit* - the metal cutter from the cardboard container is pressed onto the cardboard. This piece must be modified slightly by inserting a small screwdriver or razor to bend the clamped metal back out slightly before it will fit in the groove of the new printed container. Mine clamped on fine but you may need a drop of superglue. I've updated the photos to illustrate.
Two versions are included, a plain one and one with some texture. Textured version requires good bed adhesion and slower printing.
Printed with no supports in PLA+ with %20 infill and 1.2mm walls.
Good luck, and tell me what you think!