1 / 2
Sink Strainer for the kitchen sink
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a plug i designed for our kitchen sink a while back.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 63
- Makes
- 1
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple plug for the kitchen sink. Works for a 80mm hole. It works best if it is printed in ABS or PETG plastic. PLA tends to distort quicker when subjected to hot water. We have used the design for a long while and it works really well but we have had to replace it an number of timed due to distortion, hence the use of ABS or PETG.