mxion Drive-SR mounting accessories for LGB 2067 20670 [parametric]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insulation nuts and mounting plate to properly install the mixing Drive-SR DCC Decoder
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
This model features a holding plate to mount the mXion Drive-SR in place of the old decoder PCB of the LGB 2067 / 20670 track cleaning locomotive. The model also has two washers included so that the screw and PCB is insulated from the conductive weight.
The model is parametric and designed in OpenSCAD. I've uploaded the STL, as well as the source file, so you can adjust it to your needs. My LGB 2067 was already fitted with a DCC decoder. The original decoder was held in place by 3 screws mounting it on top of the weight. If you have a different revision, check/adjust the following parameters:
// hole distance diagonal
hdd = 38;// hole distance longitudinal
hdl = 11;
These parameters are the distance between the mounting screw, measured center-to-center.
In case you have a different model and found to need different parameters, let me know in the comments.
I've printed this with 0.1mm layer height on white reflow rPETg.
Happy printing!