1 / 4
High speed motor mount for V2 conversio
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses stock spur gear and different spacing to achieve lower gear ratio on V.2 Mid-motor conversion for MF-01X
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Thanks to Poor Boys RC speed challenge, I got this idea. It reuses stock MF-01 34T/24T spur gear in place of the original 37T/21T, to achieve lower gear ratio.
The mod supports 21-33T pinions with FDR ranging from 4,44 to 2,83. Its real-world capabilities weren't tested yet :)
Use M3x10mm screws to mount the motor. You can use 10mm dia spacer to avoid deformation of the motor mount. The mount should be printed out of high temp material like ABS or ASA.