1 / 1
Sskki's 4-DoF Snap-Fit Eye Mechanism
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
(just add servos)
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 123
- Makes
- 0
- Views
- 822
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- GNU General Public License v3.0
Description
A 4-DoF animatronic eye mechanism that is completely 3D printed except for 4 MG90S servo motors. Inspired by Will Cogley's Snap-fit Eye Mechanism. See my blog post for more details.
Degrees of Freedom
- Eye pan (left / right)
- Eye tilt (up / down)
- Left eyelid (open / close)
- Right eyelid (open / close)
Print Instructions
- No supports required
- All files are in correct printing orientation
- Designed to print at 0.4mm layer height
- Smaller layers will improve quality
- Each part should be printed once unless otherwise specified (eg. x2, x4)
Hardware Required
- 4x MG90S servo motors
Assembly
- Refer to “complete_eye_mechanism.step” for assembly
- The servo motors are omitted but their position and orientation should be self evident
- Some parts have 0.4mm tall runners to help with bed adhesion
- Cut them off with a knife or tear them off with pliers
- They should be easily recognizable, they should be 1 or 2 layers tall
- “frame_eyelid_servo_clip_left.step”, “frame_eyelid_servo_clip_right.step” and “frame_y_axis_servo_clip.step” each have 1 wide runner across the middle
- “x_axis_frame” has 4 runners