Voron Exhaust CAN Cable Route
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another CAN cable routing solution through the exhaust grill and along the rear panel
- Rating
- 0 / 5
- Likes
- 63
- Downloads
- 222
- Makes
- 0
- Views
- 1,780
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I'm not a big fan of drag chains so I used CAN toolhead board to get rid of X and Y chains. As the first step to eliminate Z-chain I'm rerouting the CAN cable to exit through the exhaust grill and enters the electronics bay through the rear center skirt. This will keep the wiring inside the chamber as clean as possible. The second step will be something I call Z-snake which I'll upload soon. With that, I finally got rid of all drag chains on my printer.
Note: This is designed for 250mm Voron 2.4 with Monolith Panels (6mm gap between rear panel and frame). Feel free to modify the STEP file included to suit your printers.
BOM
- 2 x ECAS04 Collet clips
- 2 x M3x8 SHCS
- 4 x M3x12 SHCS
- 2 x M3x16 SHCS
- 2 x M5x10 BHCS
- 6 x M3 Heat set inserts
- 2 x M3 Drop in T-nut
- 2 x M5 Drop in T-nut
Print settings - VORON STANDARD (No support needed except for the covers)