Height Extension for KYZ HSW x Gridfinity Organiser - Mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add another panel to your KYZ HSW x Gridfinity Organiser - Mini for added storage space.
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 202
- Makes
- 2
- Views
- 901
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
Adds an additional middle panel to the KYZ HSW x Gridfinity Organiser - Mini. This adds 7 hex extension for an 165mm height increase.
Please common sense in designing your tool board or display - don't put heavy things right at the top and weigh down the bottom!
Materials
- Any stiff material (PLA/ABS/PETG, etc)
- Whilst PLA will be fine for general indoor use, be wary of using PLA if this will be in a hot car, or in the sun on a warm day (especially if it's a dark colour)
Print settings
Tested with a 0.4mm nozzle. With this:
- If PETG - use 4 perimeters
- If PLA/ABS/ASA/PETG-CF/etc. - use 3 perimeters
- 4 bottom layers and 5 top layers
- Infill of your choice
- Print outer walls slowly for a strong part with consistent gloss level
- If your printer has an auxiliary fan, turn this off - the layer times are already high to ensure each layer is cooled before the next layer, and there are very few overhangs to worry about
- The rest is up to you
General precautions apply for printing large parts - ensure your build plate is clean (wash with hot water and dish soap and dry with a clean towel), add mouse-ears and/or apply some glue in the corners if you often have adhesion issues.
Support
If you would like to say thanks, please post a make and share here and on socials. You could buy me a few metres of plastic on Ko-Fi otherwise, please post a make and check out my other HSW models in this collection. If you are using these stands as a part of your business and are finding it helpful, please consider buying this price label model to support more projects like this.
Remixes with significant changes are very welcome.