Basket filter for hot tub
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.14 – €0.17 net (excluding VAT)
For file: PETG_filter_holder_12m_0.2mm_MK2.5S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hot tub filter for filter balls. Throw away the paper ones, you can do better!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 49
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
My friend use way too much paper filter for their hot tub, so I made them this! You can just fill it with filter balls and just don't care. I moddeled the holder and the diameters after the paper one, even the high. It will hold many balls, but I don't think that's a bad thing. It's on the wall of the hot tub, so it doesn't need lid of something like that.
If you print it out, please, show me your photos! I would be glad to see it!
Printing instructions
Material: I highly recommend something tough. Like PETG or something more durable. It will be in water, used… for a help use this table.
Layers: 0,35 mm and 0,2 mm for the small holder
Infill: 0% - it doesn't really matter, everything is through perimeters
Brim: Yes, for the small filter holder/teeth
Assembly instructions
Only thing you need to do, is get rid of the brim, maybe file a bit fo the ,,tooth'' and slid the ,,holder'' in the hole and add little bit of glue.