1 / 1
Pen Blank Drilling Vice
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a little vice I designed to hold pen blanks at 90° while I drill them on the drill press.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 246
- Makes
- 4
- Views
- 1,370
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a little vice I designed to hold pen blanks at 90° while I drill them on the drill press.
The knobs have imbedded 5/16" nuts. The print will need to be paused at 13.6mm to insert the nut, then resume the print.
You will also need: 2x 5/16" hex nuts, 2x 5/16" x 2 ½" bolts.
I printed at .20 layer height with 25% infill using PLA.