C.O. Bigelow Shave Cream Replacement Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This cap neatly fits C.O. Bigelow aluminum shave cream tubes - to replace broken or lost originals.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 24
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
This cap neatly fits C.O. Bigelow aluminum shave cream tubes - to replace broken or lost originals.
This can work for other types of toiletries, as the aluminum squeeze tubes are rather common and appear to use similarly sized threaded caps.
Print at 0.15mm resolution - slicer defaults are fine. Works great with PLA. Try printing with fuzzy skin (outside only) for a slightly textured grip.
Although this is a solid model, it seems some water is able to escape the cream over a long period of time - somewhat drying it out. You may need to adjust print settings for higher infill or flow, and consider sealing the cap with a thin sealant (eg polyurethane). This is only an issue for long-term storage and very infrequent use.
Enjoy!