Support Interface Calibration Tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Calibrate and test your support interface settings with 2 overhangs.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 86
- Makes
- 1
- Views
- 365
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
For breakaway/dissimilar support interface materials, you should use 2 layers of 100% support interface density (no fan). Have 0 height space between the interface and the supported layer.
For same material support interface, you should use 2 layers of 30% support interface density with 100% fan. Have one layer height of spacing between the interface and the supported layer.
In both cases, the support interface should easily detach after the print cools down and leave a smooth top and bottom surface as if you had printed the overhang section on the buildplate.