1 / 1
Qidi X-Plus 3 Beacon/Cartographer probe mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for stock nozzles for the X-Plus 3 hotend.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 86
- Makes
- 0
- Views
- 994
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
Tool head seems to differ slightly from the X-Max, so using the original by Mc Sneaky seems to put the probe about 10mm too high relative to the tip of the nozzle. Print in the same orientation as Mc Sneaky's version.
Uses the same hardware as Mc Sneaky's version:
2x 2.5x16 screws
4x M3x14 bolts
2x M3 nuts
Holes facing the the two screw holes for the beacon probe are also slightly widened a bit for M3 threaded inserts instead of nuts. Holes for M3 nuts are also deepened so they'll need to be pushed in a decent distance if those are used.