LGB Coupling Hook - Toothed Rack compatible
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Coupling Hook for attaching LGB Locomotives and carriages to another, which is compatible for rails with Toothed Racks.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 79
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Open Community License v1
For my LGB model railway I had to make some rack railway sections, but the original coupling hooks will detach, because the toothed racks will lift the downward part of the hook, so the carriages likely will detach, just very similar to the uncoupling Rail.
Märklin offers some hooks which should be compatible for Gearwheel operation, but these are very expensive.
I've uploaded two models, V1 is moreless the original shape (which can be bought from Märklin), V2 has a slightly increased hook in comparison to the original models. (V2 worked for me much better, because some little hills under the rails caused a detachment-issue, when the spring was a little bit worn out)
Both models are compatible with the uncoupling Rail, too. (So they detach, when they should :) )