GraviTrax Junior - go vertical
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add another dimension to GraviTrax Junior. Vertical drops, funnels and vortices, we got you covered.
- Rating
- 4.833 / 5
- Likes
- 53
- Downloads
- 582
- Makes
- 7
- Views
- 2,289
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to spice up GraviTrax Junior, I created a set of vertical drops, a catcher as well as a small and a big vortex to collect marbles from multiple tracks. The drops can be stacked on top of big drop towers to adjust for height and air time.
Without the catcher underneath, the vortices also work nicely as marble collectors.
For the catcher, I wanted the arch to end right at the edge of the piece, so the marbles cannot roll back and get stuck inside. So it ended up being a 5x high part, whose design was highly inspired by Seppel's 5-Fach Höhenstein: https://www.printables.com/model/700671-gravitrax-junior-5-fach-hohenstein-high-stone
His part also works perfectly as a see through drop tower as well as side drop-in part, especially if used together with his bridge: https://www.printables.com/model/702577-gravitrax-junior-brucke-bridge
Printing instructions:
- 0.2 mm, adaptive layer height (to get nice vortices)
- 2 Wall loops
- Normal support, on build plate only