Sony Kitlens Lenshood with cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A square lenshood to be pressed onto a M40.5 filterring. Comes with a cover
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 72
- Makes
- 0
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This is a lenshood for the Sony Kitlens. It is obviously inpired by the many square hood desings out there.
To assemble the hood, you need a screw-on filterring with a M40.5 thread. The standard design is made for the K&F filters with am outer diameter of 42.85 mm. Just screw the ring on and line the hood up. Then take it of again and press the hood onto the ring. Be careful to not break the little endstops.
The tolerance is pretty tight, so the hood is realy snug un the ring.
The cover is a 3 part model. Just stack the parts and glue them together, without getting glue on the spring. I used some superglue and it's really tight.
The round cap has a square hole to emulate my old mediumformat camera from the 50s.
The lenshood in the pictures was printed with a 0.6 mm nozzle at 0.15 mm layerhight and scarf joints.
If you need a different size hole, just ask, i can make it for you. Or modify the STEP file.