1 / 2
Pool and Snooker cue tip shaper.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pool and Snooker cue tip shaper from 7mm to 14mm.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 503
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Hi!
I modelled this to allow shaping of the tip of any cue.
Printed in PLA at 20% infill & 3 perimeters. Print the shaper and the shim, then add glue to the curve of the shaper, add sandpaper, press into shape with the shim then clamp with the shim inserted. I taped the top surfaces with electrical tape to protect it from excess glue. Wait for the glue to dry, then trim sandpaper to shape.
I couldn't decide if I preferred the 3 or 4 finger version so have uploaded both.