Hard Drive Storage for IKEA Vattenkar Laptop/Monitor Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€15.58 – €19.05 net (excluding VAT)
For file: Hard Drive Desk Storage_19h36m_0.20mm_205C_PLA_CR10V3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €17.31 excluding VAT (range midpoint).
- Weight reported by the author
- 169 g
- Print time reported by the author
- 19.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Storage shelf for two hard drives. Attaches to IKEA Vattenkar Laptop Monitor/Stand.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I made this to fit two hard drives into my IKEA Vattenkar Laptop Stand. The clips at the bottom attach to the back of the stand and slides through. I also added thumb holes to easily take out the hard drives.
Printed in PLA with 15% infill, 0.2mm layer height on a Creality CR-10 V3.
Made on Onshape: https://cad.onshape.com/documents/fa4bc6f154e81f72c5760e3f/w/1cb480fd68c62d11d3b41b8a/e/6be51bcb55608451dda5f895