Bicycle Folding Handlebar Mirror 15mm Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bought a pair of folding mirrors but didnt fit my handlebar, this adapter fixes that.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 39
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update(06.07.25): New model for the BM_Mirror chanfering out sharp edges and adding locking tabs so that the mirror cannot spin once screwed into place. if the mirrors you bought dont have the holes on the gray plastic part like in the pictures, print v1.
About this model: I bought a pair of folding mirrors for my bike on amazon, they fit 16-22mm handlebars, sadly i didnt measure mine right and are just shy of 15.5mm, also they have a weird plastic piece poking out that conflicted with my handlebar grip, so this 3 models are designed to fix all of that.
Materials: Print in PETG, ABS or stronger. the mirrors use preasure fittings and also need to withstand the outside elements.
Print Settings:
- Use brims as outer only, theres not enough buildplate surface for the print to stick well.
- No Supports needed, just well tuned bridges. "BM_Mirror" uses a sacrificial layer as support you need to cut with a boxcutter or knife and “BM_Screw" has built in bridges for the screw hole, so minimal post processing is required.