1 / 2
Sliding Box 5 - for 3x5 Notecards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple box suitable for holding a 1 inch thick stack of 3x5 notecards
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 1
- Views
- 234
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Works best if you print the inside and outside seperately. Requires no support. 0.22 layer height is reccomended on a 0.4mm nozzle. PLA Pro works best.
Orient the inside on the large base,
Orient the outside on the end so the open end is up.