1 / 1
3 X 5 inch Notecard Standing Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For holding your notecards, but also for displaying them while you work.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 2
- Views
- 198
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print oriented on the largest flat side. 0.4mm nozzle and 0.22mm layer height recommended from PLA Pro. No support needed.
Warning, the sides of the base are thin and tall. This will not hold up to mild abuse like my other box designs.
The base has a little nub at the bottom to help secure the top, This may need to be adjusted if your printer calibration is different using XY scaling on the top or horizontal expansion on the bottom, or cutting it using a support blocker (modifier cube).