folgertech FT5 Z axis sync
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows for timing belt synchronization between the 2 Z axis motors.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This is to sync the 2 Z axis motors together on the FT5.
The front spindle mount plate uses the stock screws and channel nuts for the bottom and 6-32 screws to attach front bearing spindle mount to the top and bottom of the spindle. use the spacers as needed to allow for a screw to pass through both mounts and the spindle. I used 4 spacers two tight and two wide 1 of each per bearing mount. the slide mount and toothless spindle takes a bearing with a 8-32 screw and washer on the bottom use the spacers in the bearing here as well.
The belts I used. https://www.amazon.com/gp/product/B0CQP34D6V/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
The double sided pulleys
https://www.amazon.com/gp/product/B071ZMGG63/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
The other pulleys needed
https://www.amazon.com/gp/product/B09V5C1F7C/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
bearings
https://www.amazon.com/gp/product/B0B4JH1XVP/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1