1 / 7
PiKVM DIY Case (WIP)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PiKVM DIY case (work in progress)
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 125
- Makes
- 1
- Views
- 855
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for PiKVM DIY
IP-KVM OpenSource Project PiKVM. (https://pikvm.org/)
Note: This model is still a work-in-progress.
This is made as a concept. Printable and works, but some design changes are needed.
Chages has been made, but still in testing. Few clearence problems. Might do a “complete” redesign (2024-08-10).
Parts needed:
- Raspberry Pi 4
- HDMI to CSI Adapter
- USB-C/PWR Splitter
- 4010 5v fan (optional)
- M2.5 heated inserts
- M2.5 screws (+bolts for fan)
- Short USB-C cable (power+data)
Parts note: M3 inserts and screws works for top and fan. M2.5 for electronics.
v1.1
v.1.0
Changelog:
- v1.0 - Version 1.0 (concept)
- v1.1 - Redesigned top. HDMI to CSI board now screws to top. (2024-08-07)
- v1.1.1 - Small change to top. Fan position moved to allow access to all pins. (2024-08-08)
- v1.1.2 - Fan position moved (again). Better clearence CSI connector. (2024-08-10)