Flashforge Adventurer 5M Spool Holder (Original Replace)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the original spool holder of the Flashforge Adventurer 5M.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 128
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
"I present to you the model I designed to replace the original spool holder of the Flashforge Adventurer 5M. Printed in PLA or PETG, it fits better and is more smooth, with similar dimensions and the same depth footprint.
Adapted to use the original screws.
Printing Info
it is preferable to print with good infill in the base for the first 5mm to ensure adequate strength for the weight of the filament spool.
Layer Height: 0.2mm
Wall: 3 or more;
Infill: Base(0-5mm) should have an infill of at least 50% with 4 walls, while the rest can have 35% infill with 3 walls.
Materials: PLA, PETG.