LIGHTHOUSE-HUEFORGE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a piece of art that you can buy the original on displate.com, but here is MY interpretation of it. Like a tattoo
- Rating
- 4.2 / 5
- Likes
- 174
- Downloads
- 481
- Makes
- 5
- Views
- 2,359
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 167.86x235mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Green Transmission Distance: 1
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #6 (0.56mm) swap to Azure Blue
At layer #9 (0.8mm) swap to Green
At layer #12 (1.04mm) swap to Red
At layer #15 (1.28mm) swap to White for the rest.