Mushroom fidgit pal
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.81 – €2.21 net (excluding VAT)
For file: Mushroom_0.4n_0.1mm_PLA_MK4_2h30m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.01 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 2.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I little mushroom character with an integrated key switch for movement.
- Rating
- 4 / 5
- Likes
- 86
- Downloads
- 490
- Makes
- 1
- Views
- 2,626
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
My kid wanted a mini mushroom pal. I had some MX Cherry switches and figured I could combine the two.
I printed with Inland Marble PLA with mostly stock settings. I added a perimeter so I could make it hollow and amplify the noise of the key switch. (I used MX Blue)
Placing the body upside down on the build plate lets the first layer squish a bit and snaps firmly onto the switch.
I painted supports under the cap to help it stay solidly on the build plate, but it also results in a nice “gill” texture on the underside. The seam is painted on the back of the body, but automatic on the cap.