1 / 2
Voron v0 - Foldable Spool Holder for Siboor V0
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified to fit the Siboor supplied v0 extrusions.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Edited the connector tabs to be 2.8mm thick to fit better on the Siboor extrusions. I found that the original and the remix for LDO extrusions did not fit with my Siboor kit.
Just quickly resized the connector tabs to be 2.8mm thick and that fits pretty well on my Siboor V0.2. No other changes made.
Printed in ABS using the Voron part spec. I print ABS/ASA on a smooth plate with glue so I don't use brims too often. You may want to add some mouse ears to the parts if you have bed adhesion issues with small parts.
- Layer height: 0.2mm
- Extrusion width: 0.4mm, forced
- Infill percentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: NONE