Bar Soap Picnic Table Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple clamp for your picnic table to hold a bar of soap for hand washing.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 42
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Summer
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a clamp for a picnic table at a campsite with a tray to hold a bar of soap. The tray is slanted and has ridges to allow water to drain and the soap to dry. The clamp can be used on tables up to 1.5" or 40mm thick.
Printing Instructions (Standard):
I used PETG (recommended for outdoor prints) with 0.2mm layer height, 20% infill, 3 walls, and supports for the clamp under the overhanging insert section - last image for reference. Print using the orientations provided.
There are 4 pieces: the bar soap tray, clamp, bolt, and bolt topper. To assemble, slide the tray into the vertical slot on the clamp. Then, screw the bolt in through the bottom of the clamp and press-fit the bolt topper into the notch on top of the bolt.
Please comment with any questions or specific requests.
Happy Printing!