3D printed parts and cutting dimensions for tatami (storage bench)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d printed parts, full model and cutting dimensions for DIY storage bench project
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
Complete step-by-step guide: https://youtu.be/wx4ntPgfsIo
Tools used:
Combination square
Tape measure
PVC tape
Digital calliper
Pencil
Spirit level
Clamps: 10 mm long, corner clamps and 30 mm long
Mallet
Safety goggles
Dust mask
Protective gloves
Circular saw and/or Jigsaw
Combi drill
Drill bits:
2.5 mm, 4.5 mm and 5 mm
Cross Philips type screwdriver bit
Countersink drill bit
Screws:
62 pcs of M4x30 and some M4x40 for stronger joints
8 pcs of M3.5x16
3d printed tools:
Centre drilling guide
Marking pins
Heart shaped template
Shelf supports
Corner piece for lids
4 by 2 ft of plywood:
6 pc - 18 mm thick
2 pc - 5 mm thick
1 pc - 12 mm thick
There will be a lot of left over, but plywood can be easily repurposed for something else (i.e. box, shelf)