Starbond Caddy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds the standard Starbond CA glue (x3), accelerator, a spot for the tips and caps. I rounded the bottom of the…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Holds the standard Starbond CA glue (x3), accelerator, a spot for the tips and caps. I rounded the bottom of the trough for the tips and caps so it's easier to slide the parts out.
The other caddy's I printed here had too tight of tolerances and my CA glue bottles wouldn't fit.
These are actual measurements I got after printing: ID of CA glue cylinder: 37mm ID of accelerator cylinder: 55mm Width: 90mm Length: 195mm Height at the CA glue holder: 35mm Height at the Accelerator holder: 55mm
My print looks crappy because I cranked up the speed and layer height to 0.4mm. Printed at 15% infill, plenty good for this.
Category: Tool Holders & Boxes