Fischertechnik Flex Rail System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Expansions for the Fischertechnik marble run.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
Our son got his first Fischertechnik set for his birthday. And because there are never enough small parts in such boxes, I started looking for print templates before the first assembly. I found what I was looking for on Thingiverse and wanted to share the model, which is not mine but fotoopa's, with you here.
Apart from the flex pins, I printed everything in PLA (three perimeters and, because I'm a bit of a perfectionist, 1.5 mm layers). All in all, everything fits very well with the basic system. With the pins, however, I have to realise that although they fit in PLA, they don't hold as well as when you connect the printed parts to the original. I therefore scaled them slightly (x = 105 %, Y 108 %, Z = 100 %). It works well from my point of view, but it can be a little tight with some parts of the original system (especially the more rigid ones like the battery pack).
Note: The files available here are in the original scaling. Try the scaling by yourself.