Stacking Table Signs with Replaceable Name Plates and Card Slots
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Table signs with replaceable name placards. Slots for business cards. Stackable for transport. Magnets! Easy to print.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 250
- Makes
- 0
- Views
- 783
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I put this design together recently for a commissioned job, and I'm sharing a generic version of it here. I plan to use these at my booth at an upcoming Makerfest.
Provided is a frame for a simple “tent”-style table sign and a basic tray/bin, each with dovetail slots for nameplates/placards which are secured in the slot with 10x3 magnets.
Multiple sign tents can be stacked for easy carry – the stack fits inside of the provided tray, and an embedded ¼-20 nut allows the whole stack to be clamped together for transport using a piece of threaded rod.
Only a blank nameplate is provided here –– your own custom logos and text can be easily added as embossed/debossed or embedded features in the slicer, and multi-color printing can be easily achieved either by layer pauses or with a filament-changing system like the Prusa MMU or Bambu AMS.
Tip: you can use inexpensive, self-adhesive NFC tags (NTAG21x) attached on the underside of the nameplates for a “tap here for more info” feature.
--
All parts should print well with 0.4, 0.6, 0.8mm nozzles and relatively standard wall/infill settings.
Tray - print in obvious orientation. Use auto supports or paint manual supports onto underside of dovetail lip and hole for ¼-20 nut.
Nameplate - print flat on large face. No supports required in magnet holes.
Sign Frame - print on side per STL default. No supports.
Magnets should press-fit but may benefit from a dab of CA glue. Be careful to set polarity appropriately.