Universal Lawn Chair Cup Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cup holder that clamps onto a lawn chair or foldable table leg.
- Rating
- 0 / 5
- Likes
- 62
- Downloads
- 172
- Makes
- 0
- Views
- 1,013
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This cup holder attaches to a lawn chair or foldable table. It uses a clamp with two 3mm bolts and nuts to clamp to a vertical tube leg similar to a handlebar mount.
The maximum tube diameter is 30mm which should fit on most chairs. The inside diameter of the cup holder is 80mm and is large enough to fit a 30oz Yeti or similar larger cups.
You will need two 3mm nuts and two 3mm bolts long enough for the clamp (The minimum bolt length is 20mm, although longer is likely necessary).
Printing Instructions (Standard):
I recommend PETG (for outdoor prints) with 0.2mm layer height, 20% infill or more, 3 walls, and no supports. Each part is printed as oriented.
There are 3 parts to this build: the main cup holder and two clamps. To assemble, use 3mm bolts and nuts to secure the clamp to a vertical leg, then slot the cup holder in place.
Please comment with any questions or specific requests.
Happy Printing!