Banana Pi BPI-R4 Rack Mount Module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A module for the DAP 2U Rack Mount Panel to mount your Banana Pi BPI-R4 into your rack.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 93
- Makes
- 0
- Views
- 1,997
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
The Banana Pi BPI-R4 is an inexpensive, very powerfull 10G router. To mount it in my homelab server rack I designed this module for the DAP 2U Rack Mount Panel.
It has a small hole to the left of the SFP+ ports, so you can see the SFP status LEDs.
If you want to use a M.2 Key M module (e.g. a NVME SSD), you should install this before screwing the board to the printed module. Other than that, there shouldn't be many restrictions when using this module.
Printing instructions
I recommend printing this module in PETG or another filament with good layer adhesion. No supports required.
Non-printed parts
- 4x M3x10mm Screws
- 4x M3 hex nuts