VR 5,25" Shield
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.62 – €5.65 net (excluding VAT)
For file: VR-5,25-Shield_0.2mm_PLA_MK3S_5h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.13 excluding VAT (range midpoint).
- Weight reported by the author
- 67 g
- Print time reported by the author
- 5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 5,25" front shield for a PC to connect VR-headset to the PC directly. The video connector is designed as a slot for…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 557
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
A 5,25" front shield for a PC to connect VR-headset to the PC directly.
The video connector is designed as a slot for a keystone module so you can insert whatever your headset needs. I'm using a Rift CV1 so I needed HDMI. Just route the cable through the case and connect to your graphics card.
You will need a HDMI keystone jack and an EZDIY-FAB USB shield. I removed the PCB from the USB shield and screwed it into the new housing.
https://www.amazon.de/dp/B076Q4RKZZ
https://www.amazon.de/dp/B07D268R4H
You can also use a Mini-Displayport keystone module and a converter to Displayport to use this with newer headsets.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,2mm
Infill:
10%
Filament:
Prusament PLA Black
Category: Computer