Makita Extended Router Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an extended base for Makita trim routers (RT0700, DRT50, RT001G, etc)
- Rating
- 5 / 5
- Likes
- 94
- Downloads
- 497
- Makes
- 5
- Views
- 1,862
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is an extended base for Makita trim routers (RT0700, DRT50, RT001G, etc)
Remixed from https://www.thingiverse.com/thing:2519083
Update Nov 2025: I've uploaded an updated v2 base plate that fixes the outer edge so it is concentric with the spindle of the router.
I liked Wherzog’s design but found it was a bit flexible when printed in ABS, so I added a rib with an extra mounting bolt to stiffen it up. I also found the handle tended to come unscrewed in use, so I designed a new handle that is mounted with 2 screws instead of one. You can flip the handle around to adjust its position in or out by 15mm.
There are 2 versions of the handle, one designed for heatset inserts, the other for direct self tapping with M4 screws.
Required Hardware
- 1x - M6x25mm cap head screw
- 2x - M4x16-18mm flat head (countersunk) screws
- 2x - M4x8mm heatset threaded inserts (Optional)