1 / 4
Tamper/Portafilter holder for Delonghi Dedica 885 — image 1
1 / 4

Tamper/Portafilter holder for Delonghi Dedica 885

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tamper/Portafilter holder for Delonghi Dedica 885

Rating
5 / 5
Likes
30
Downloads
197
Makes
4
Views
1,061
Reviews
4

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

There are holes for two optional magnets (6mmx2.7mm). 

Supports are required.

I recommend normal supports (not organic) for the model.

See picture with recommended orientation (the long hook that holding the holder on machine should not be printed vertically as it will break easily).

STEP file included.

14/09/2024: Version 2 uploaded with the following modifications:

  • Now it is not sliding left & right
  • Magnet holes increased so 6mm x 4mm magnets to be used (instead of 6mm x 3mm)
  • Curved surfaces replaced with flat one so it is easier to remove supports

How to attach (older model): https://www.youtube.com/watch?v=t8Up9XjFyzQ

I've printed it in Jayo E-ABS on my Elegoo Neptune 4 (0.4mm nozzle) as per included picture orientation using the following settings:
Temperatures: 230/70
Layer height: 0.2mm
Line width: 0.6mm
Speeds: outer wall 90, inner wall 130, infill 140, supports 140
Infill: gyroid 25%
Supports: normal/snug (auto), blocked in magtet holes

You can use brim for better adhesion (mouse ears recommended).

Tags