1 / 2
Thermaltake Tower 100 SSD Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sideways SSD Bracket to better conceal SSDs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a variation of the SSD mount from Thermaltake for the Tower 100. Replaces the OEM SSD bracket.
I designed it to better conceal the SSDs, as the OEM bracket faces them upwards, side-by-side, where there is plenty of room for them to sit below the shelf sideways.
Will need a very narrow screwdriver if you want to use both drives, as the inner drive top screws are behind the top mount point.
Designed to be printed without supports. Print side-ways.