Gridfinity M10 M12 tap storage colapsable
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.98 – €1.20 net (excluding VAT)
For file: Gridfinity bit storage M10 M12 v3_0.6n_0.2mm_PLA_MINIIS_53m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.09 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 52.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
gridfinty tap storage simple elagant convenient this is the M10 and M12 version an M3 to M8 version is also avaliable
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
for other tap sizes use this link
https://www.printables.com/model/969916-gridfinity-m3-m4-m5-m6-m8-tap-storage-colapsable
Printing Instructions
Print in PLA
The text is added in prusa slicer if you use my print files it will be there but i havent included it in the stl because its superflouse.
print the tap holder with the holles facing down as shown in print filles i tried flatt and it didnt print well although if you want printed text on holder to denote the tap size you would have to print it flatt on most printers.
Gridfinty Compatability
this is a modification of a 2x3x3 gridfinity module in order to store taps it fits well in to a 30mm draw making it ideal for dense storage it is ofcourse stackable. i used the fusion360 plugin for generating gridfinty modules as a starting point.
Features
A folding tap storage solution it is ideal for dense storage it fits M10 and M12 taps allowing for up to three of each to be installed it is impossible for them to fall out as the depth of the holles and the lable block act to prevent taps falling out while allowing them to be easly removed once unfolded. Due to the folding nature of this system you can pick up and carry these vertically making it an ideal solution for sticking taps in a bag of pocket without worrying about them getting loose.
Notes
Please feel free to modify i have included the step filles i have multiple other versions of this system for other tools but i may not have the ones your looking for so please do make your own version
M3 to M8 version linked here
https://www.printables.com/model/969916-gridfinity-m3-m4-m5-m6-m8-tap-storage-colapsable