Millennial Falcon 2.0 - millennium falcon fan model

An awesome video from the 3dprinting nerd!

Here is a link to detailed instructions: https://docs.google.com/document/d/1KDRXu7u-fEv7_Fu8X6EB74nruDYoBuEng44OES5XB0Q/edit?usp=sharing

Print Settings

Printer Brand:

Bambulabs

Printer:

Bambu P1P

Rafts:

No

Supports:

No

Resolution:

200 micron

Infill:

3%

Notes:

There also are resin versions attached to this thing.

Post-Printing

Here is the printing guide!

Here is a link to detailed instructions as a google dock: https://docs.google.com/document/d/1KDRXu7u-fEv7_Fu8X6EB74nruDYoBuEng44OES5XB0Q/edit?usp=sharing

This is a guide to printing and assembling the falcon. Many improvements have been made on the first but please comment any ideas on the 3d model sharing site you found the files if you run across them while building. The resin version is self explanatory but the FDM one requires a bit of patience and steady hands.

All parts should print without supports and are oriented that way. If the parts are tipping over mid print I’d recommend using brims and increasing the bed temp before resorting to using supports. First start by printing out all the pieces. I usually start with the top and bottom dome. Once the pieces are done, lay them on a flat surface and check to see how they fit. Some gentle sanding might be needed.