1 / 1
GSX-R600 K8 K9 L0 Right switch box adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This part goes into the right side of the throttle assembly. It ensures that the throttle 'grips' onto the clip-on.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This adapter fits inside the throttle switch box housing on the right side clip-on.
If the model doesn't fit well, you can make a copy with OnShape, and adapt it there.
Warning
Use this 3D model at your own risk. The author is not responsible in any way if you print and use this part. This is not an official part and if print and part quality isn't high enough, your throttle might stop working while riding!
Printing guidelines
- Do not print this with filament material that tends to break such as PLA. Make sure you use a mechanically strong filament that bends instead of breaks, such as Nylon/PA.
- I encourage you to print several and perform stress tests.
- Print with Y axis down (so Y becomes Z-)