1 / 1
Kawoosh - FLSUN T1 Cooling Duct
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Entry for NeedItMakeIt Duct Design Challenge. See Description for print details.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 83
- Makes
- 0
- Views
- 754
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed with a 0.14mm layer height with a .4mm nozzle.
Painted on Organic tree supports under the Mounting hole:
To help maintain the two connecting ducts internal geometry: "Bridge Infill Direction" should be set to 90deg in OrcaSlicer (its called Bridging Angle in PrusaSlicer) to align the bridging infill parallel to the main inlet splitter across the internal bridges
Layer Immediately before bridging (you can see the little steps i put in in Dark Blue):
Layer with bridging (in light blue) aligned as described:
