1 / 6
TopRC Odyssey Main and Nose Gear Adaptors for the JP Hobby ER120S Landing Gear Conversion — image 1
1 / 6

TopRC Odyssey Main and Nose Gear Adaptors for the JP Hobby ER120S Landing Gear Conversion

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

installation pictures will follow, forgot camera ...

Rating
0 / 5
Likes
0
Downloads
12
Makes
0
Views
94
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

For use with the JP Hobby ER-120S Tricycle Full Set with Brakes (Sebart Avanti XS 1.9m or ARG Mistral 1.8m or EA Viper 2.0m)

These adaptors are a very tight fit but this is necessary to take the weight and impacts of the landing gear, slide them in like in the pictures, in the wings all the way to the end of the supports, squeeze them completely down and then gently push the retracts in for a first fit and feel how these adaptors settle in the plane.  

Mark drillholes, remove adaptors, drill 4mm holes to receive ‘clawed M3 countersunk nuts’, put the adaptors back in place all the way back and down like in the pictures and then gently alternate screws when screwing down te retracts with nutlocking agent using m3 x 20mm hardened steel countersunk Philips head screws and when completely down tighten very good. You just saved nearly 800 grams of weight for this plane.

Print the adaptors in a carbon filament, I used Extruder GreenTEC Pro Carbon @0.16 layer height, gyroid infill 33 percent and 5 walls, 10 bottom and top layers.