Beacon Rev H Mount for Voron Switchwire w/ StealthBurner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds mount points and cutouts to the original x-axis mounts, to fit Beacon rev H Eddy current sensor.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 100
- Makes
- 0
- Views
- 693
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Adds mount points for Beacon Rev H to the Switchwire toolhead mount.
Based on the original voron mounts, but adds:
- Mount points at the bottom.
- Cutout for the JST connector
- Extra width to one of the omron mount slots, so both jst connector and cable can go through.
Notes:
Keeps the space for the original omron probe.
To adjust for various hotend, i have added spacers (1,2,4mm), so you can adjust the height above the nozzle. I used 6mm.
The Beacon is a bit further back than the recommendations. I measured 18 mm from nozzle to the tip.