1 / 5
USB Capture Card Housing (w/ Cold Shoe)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A housing for cheap USB capture cards, with optional cold shoe.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
I use this to turn my phone into an HDMI monitor that can be mounted on my camera.
I recommend printing with the ports facing down to minimize support and for more of a secure fit.
Note: This is only compatible with the capture card shown below. Disassemble your card and check if you are unsure.
Print Settings:
Printer: Ender 3 v3 SE
Material: PLA
Layer Height: 0.2mm
Wall Line Count: 4
Infill: 30%
Support: Yes if printing w/ cold shoe