C9 Christmas Light Nail Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.21 – €0.25 net (excluding VAT)
For file: Nail Mount_0.2mm_PETG_MINI_17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.23 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 16.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement bottom for commercial C9 strand sockets that let you hook onto a nail for neat tidy lights
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 32
- Makes
- 0
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution
Designed this as a replacement for old C9 strands we had that hooked onto nails placed under the eves of our house. The old strands were at the end of their life and a lot were broken. The nail system used is fairly nice, requiring a bit of work one year to put it all up, but after that, it's really easy to pop lights on and off the nails.
The hooks I printed with Prusament PETG settings and 0.2mm quality settings with 4 perimeters and detect bridging perimeters. Atomic Pine Green PETG is the color I used for these in the pictures.
The receiver cup I printed with Prusament PETG settings and 0.2mm quality settings with 5 perimeters, 10 solid top layers, 7 solid bottom layers, 1mm top shell thickness, and 0.7mm bottom shell thickness.
Using the cup the bottom clips on the C9 sockets can be removed using a stubby flat blade screwdriver to pop them out. Then the replacement printed clips can be put in.
I used 1 ½" 8d (0.131") hot-dipped galvanized joist hanger nails for ones I needed to replace from what we had existing. #N8DHDG https://www.homedepot.com/p/206101778 I also can recommend the excellent nail holder here https://www.prusaprinters.org/prints/59261-nail-guide-finger-guard