Bottle Wasp Trap
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.12 – €1.37 net (excluding VAT)
For file: Prusa Mini+ Print Files / hook_04n_02mm_petg_miniis_1h19m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.24 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.32 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wasp trap from a standard PET bottle.
- Rating
- 4.835 / 5
- Likes
- 2,595
- Downloads
- 7,398
- Makes
- 115
- Views
- 28,426
- Reviews
- 97
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The print requires no supports and consists of only two parts. Simply snap the hook into the wasp trap. Pour water mixed with sugar and a bit of vinegar into the PET bottle. Then screw on the printed part and place the bottle on a table or hang it using the hook.
