1 / 2
VESA 200 Plate Mount Grid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plate to mount something (e.g. HDD, Raspberry Pi etc) to a VESA 200 mm connector (e.g. TV)
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 95
- Makes
- 1
- Views
- 361
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Plate to mount something (e.g. HDD, Raspberry Pi etc) with cable ties to a VESA 200 mm connector at the backside of your device (e.g. TV).
Screw holes are 8 mm; you need at least 4 M8 x 25 screws. Can be used for M6 screws as well.
Printing instructions:
- 3 walls
- 3 top/bottom layers
- 0.3 mm layer hight
- 50% infill (zigzag)