1 / 5
FIXED GraviTrax Tipper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix fixes 5 problems with the original design
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 82
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Share Alike
Fixed the 5 problems with the original design:
- One of the pivot holders on the base had a hollow hole in it.
- Non-manifold areas in the model.
- Raised the fulcrum so that the tip tube is up at the entrance (more tipping action).
- Curved the fulcrum mounting holes so the tipping element will snap in and stay in place, and not be lost as a separate part in the toy box.
- Moved the fulcrum back so that the tip tube would actually tip when the last marble rolls in.
Print 2 rings. Glue them in the bottom. Glue the connector into the tipper. Snap the tipper into the base.
Print Settings
Printer Brand:
Bambu Lab
Printer:
A1
No
Supports:
No
Notes:
Multicolor settings are in the Bambu Lab .3mf file.
Category: Mechanical Toys