Planter Pot 1 with Drainage for Succulents and Other Small Plants (~4")
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small pot for succulents. Similar soil volume to a standard 4 inch terracotta pot.
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 289
- Makes
- 1
- Views
- 1,448
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Update 1:
I have designed a saucer for this pot. The pot can either be loosely placed in the saucer or you can put the corners of the base into the keyed edges of the saucer. When placed into the keyed edges, the footprint of the saucer perfectly matches the top edge of the pot so that multiple pots can be cleanly arranged side by side.
Original:
The STL has no drainage. I added drainage using a 60 x 60 x 2.4mm box modifier in prusaslicer with 40% gyroid infill and 0 top or bottom layers. You could also use a simple cylinder modifier if you prefer a single hole for drainage. Use the included 3mf file if you would like to see all of my settings.
This model prints well with no supports and it is very strong. ̶I̶ ̶d̶i̶d̶n̶'̶t̶ ̶d̶e̶s̶i̶g̶n̶ ̶a̶ ̶s̶a̶u̶c̶e̶r̶ ̶f̶o̶r̶ ̶t̶h̶e̶ ̶d̶r̶a̶i̶n̶a̶g̶e̶,̶ ̶b̶u̶t̶ ̶s̶o̶m̶e̶t̶h̶i̶n̶g̶ ̶l̶i̶k̶e̶ ̶t̶h̶i̶s̶ ̶s̶h̶o̶u̶l̶d̶ ̶w̶o̶r̶k̶ ̶w̶e̶l̶l̶:̶
https://www.prusaprinters.org/prints/32478-simple-plant-pot-coaster